Got tired of fasteners loosening or breaking because of single shear/adapter type E46 lock kits? Tired of wheels wobbling and/or binding under huge steering angle? We got tired of it too! That is why we made a kit that does not have these common issues. We guarantee that with this kit, your car control will be as smooth as butter under any conditions: dry, wet, snow or ice! We have tested our products under all conditions!
Some of Suboske Racing E46 Drift angle kit features :
Up to 72 degrees of steering angle
High strength steel control arms and knuckles
Wider stance to achieve necessary clearance
Roll center correction
Bump steer correction
Optimal Ackermann for drifting (4 positions)
Adjustable steering stoppers
Excellent steering steering control/feedback
Quality bearings are used to ensure long lifetime
This kit has everything you need to install :
2x Lower control arms
2x Knuckles
2x Outer tie rods
2x Top hats
2x Lower control arm bushing
4x Ackermann shims
All bearings and hardware necessary for installation
Installation/setup instruction:
For simplicity we use E82/E92 generation bolt-on type wheel bearings (P.N. 31216765157). We can supply the kits with or without these bearings, please choose appropriately, stock wheel bearings do not fit.
Must use coilovers to run this kit. As with any other kit, depending on coilover brand/model, some modifications might be required to adapt top hats.
To install this kit you will need :
Front coilovers
Stock inner tie rods
Stock brakes
Front sway bar will have to be removed *if necessary, can be adapted
Minimum wheel size R17
Wider front fenders or overfenders are highly suggested (4cm wider per side fit perfect with R17 ET20 8J/8.5J wheels)
Qualified mechanic
